Electrical problems in a home rarely announce themselves clearly. A breaker trips and resets without tripping again. An outlet feels slightly warm. The lights in one room flicker for a few days and then stop. These are the things that get set aside, and they are often the things that matter most to have checked. We cover University and the surrounding area for exactly this kind of work, from a quick diagnostic on a circuit that is behaving oddly to a full panel replacement when the existing service can no longer carry the load.
University is a city with a mix of residential and rental properties, and the electrical demands that come with that mix are real. Older construction may still have wiring that was never updated. Newer additions sometimes run circuits that were not sized for what they are now feeding. Whether you own the property, manage it, or rent it, we take the call, scope the job on the phone, and get the work on the schedule.
Call (689) 946-9829 for a quote.
Running electrical supply to a detached garage, a shed, or an electric gate is a job that involves more than pulling a wire from the house. The circuit has to be sized for the load it will carry, the run has to be protected correctly for underground or overhead installation, and the panel at the house has to have the capacity to support it. We handle the full run, from the main panel to the subpanel or outlet at the structure, and size everything for what the space actually needs.
Recessed and LED lighting upgrades come up constantly in homes that were built with older fixture types and surface-mounted boxes. The work involves cutting new can locations, running the circuit, and connecting to a switch that may need to be upgraded to handle dimming. Exterior lighting follows the same process, with the added requirement that the fixtures and wiring are rated for outdoor exposure. We handle both, and we match the circuit to the fixture load so nothing runs warm.
A home that started with 100-amp service and has since added central air, an electric dryer, and a Level 2 EV charger is asking a panel to do more than it was designed for. A service upgrade to 200-amp capacity involves replacing the main panel, updating the meter connection, and coordinating with the utility for the service-entrance work. We run load calculations before recommending a size so the upgrade is right for what the property carries now and what it is likely to carry later.
When the grid goes down during a storm, a standby generator only works if the transfer switch is installed correctly. The switch is what isolates the home from the utility line so the generator does not back-feed, and it is what allows the system to pick up the load safely. We install the transfer switch, run the wiring between the generator and the panel, and confirm the panel can handle the output. The electrical side of this job has to be done right before the generator is useful at all.
A dryer, a range, a refrigerator in a garage, or a large workshop tool each needs its own circuit. Sharing a circuit with other loads is how breakers trip and how equipment gets damaged over time. We run dedicated circuits sized for the specific appliance, confirm the panel has capacity before starting, and upgrade the panel if the existing service cannot carry the addition. Arc-fault and ground-fault protection are part of what gets considered when a new circuit is added, because code requirements for those devices have changed and older installations often do not reflect current standards.
Good electrical work isn't complicated, it's just done right, and that applies whether the job is a single dedicated circuit or a full service upgrade.
Not every electrical fault is inside the property. A partial outage, where some circuits work and others do not, sometimes points to a problem at the service entrance rather than in the panel. One leg of the utility feed may have dropped, or the meter socket may have a failing connection. These are situations that look like panel problems but are not.
When we diagnose a fault, we test from the meter inward. If the problem sits at or ahead of the meter, that is the utility's side of the line, and the repair is theirs to make. We tell you clearly where the fault is and what the next step is, including who to call at the utility and what to describe when you do. We keep you informed from diagnosis to final test, so you are never left guessing about what was found or what comes next.
If the fault is on our side of the meter, we scope the repair, confirm the price, and get it done. The distinction matters because it changes who does the work, and a clear answer on that question saves time and money. Anybody planning ahead in University can start with the services page covering electrical work.
Getting your power back is easier than you think. The first step is a call where we scope the job, confirm what is involved, and give you a price before anything is scheduled. That conversation takes the guesswork out of the visit.
For properties with tenants, we work around occupancy as much as the job allows. A panel replacement requires the power to be off for a period, and we confirm that window on the call so tenants can plan around it. Businesses that need to stay open during work are a different kind of scheduling problem, and we talk through what can be phased and what has to happen in one go.
Short-notice calls are part of what we do. We take last-minute work when the schedule allows, and we answer calls every day from 7:30 AM to 9:00 PM.
If a problem will not keep, call (689) 946-9829 and we will tell you what is available.
With a local company, a question about the work gets a straight answer. That applies on the phone before the visit and on site when something unexpected turns up.
Local coverage. Safe wiring. Costs explained before we start.
Electrical components are not all interchangeable, and the age of a property matters when it comes to matching what is already installed. A breaker panel that was manufactured decades ago may take a breaker type that is no longer stocked at a supply house. A fixture box that was installed under older code may not be rated for a ceiling fan. Knob-and-tube wiring, which turns up in some older properties, cannot simply be extended with modern wire without addressing the connection method.
When a part is obsolete or has to come from a specialty supplier, we tell you that on the call or at the diagnostic visit, not after you have been waiting. We confirm whether the repair can be completed in one visit or whether a return trip is needed, and we explain what that means for the timeline before anything is scheduled.
Knob-and-tube replacement and whole-home rewiring are jobs that come up in older housing stock throughout this area. These are not emergency repairs in most cases, but they are work that should be scoped and planned rather than deferred indefinitely. An electrical safety inspection is a practical starting point when the age of the wiring is unknown or when a prior inspection flagged something that was never addressed.
The price for electrical work depends on what the job actually involves. A panel upgrade, a dedicated circuit, a ceiling fan installation, and a whole-home surge protection installation are four different scopes, and the quote for each reflects the materials, the labor, and whether a permit is part of the picture.
The things that move a quote are straightforward. What the fault turns out to be once it is traced. What has to be opened up to reach it. Whether the existing panel can carry a new circuit or whether an upgrade is part of the scope. Whether the wiring behind the wall is what was expected or something older. We ask the right questions on the call so the price we give you reflects the real job, not a range wide enough to mean nothing.
Electrical work done to the code inspectors here enforce is part of what you are getting, and that affects how the job is scoped and what materials go into it. The price is confirmed before the visit is scheduled. If the scope changes on site, we confirm the updated cost before proceeding.
Call (689) 946-9829 and describe what you are dealing with.
We give you the rate on the phone, before anything is booked.
We serve University and the surrounding communities across Orange County. Nearby areas we cover include Union Park, Alafaya, Oviedo, Goldenrod, and Chuluota. If you are in the area and need electrical work scheduled, call and we will confirm coverage at your address.
We are available every day from 7:30 AM to 9:00 PM.
If the work needs to happen outside those hours to avoid disrupting a business operation, call (689) 946-9829 and describe the situation.
We will tell you what we can accommodate based on the schedule.
Properties in University range from older construction with wiring that has never been updated to newer builds where the panel needs more capacity than it was originally given. Common calls include dedicated circuit additions for appliances and EV chargers, service upgrades for homes that have grown their electrical load over time, and generator transfer switch installations ahead of storm season. Surge protection is a frequent request too, given how often the region sees lightning activity through the summer months.
Call (689) 946-9829 and describe what you are seeing.
A tenant can call us directly to describe a fault and request a visit. The authorization and billing conversation will involve the property owner or manager, but a tenant reaching out to describe what they are seeing is a practical first step. We can take the initial information from the tenant and follow up with the landlord to confirm the appointment.
Sometimes, but not always. In many cases wire can be fished through existing wall and ceiling cavities without opening large sections of drywall. Attic access, crawlspace access, and the direction the joists run all affect what is possible. We assess the route before we start and tell you if any ceiling or wall opening is unavoidable.
Yes, and it is worth mentioning when you call. Solar inverters, battery systems, and grid-tie equipment interact with the panel and the grounding system in ways that affect how other work is planned. We need to know what is installed before we start work on the panel or any circuit that may be connected to the solar or battery system.
Yes. We serve University and the surrounding communities in Orange County, including Union Park, Alafaya, Oviedo, Goldenrod, and Chuluota.
If you are in one of those areas and are not sure whether you are in our service area, call (689) 946-9829 and we will confirm before anything is scheduled.
If the outlet, switch, or fixture itself has failed, the repair is usually straightforward. We replace the device, test the circuit, and confirm the wiring behind it is in good condition before we close it up. A failed fitting sometimes points to a wiring issue behind it, such as a loose connection or overheating, and we check for that before calling the job complete.
Yes, and that is often the better sequence. Installing the dedicated circuit or upgrading the panel before the appliance arrives means the hookup can happen as soon as delivery is done. Call us with the appliance specs and we will scope the electrical work so it is ready when the appliance shows up.
Call (689) 946-9829 and tell us what you are dealing with.
We scope the job on the phone, give you the price before anything is scheduled, and answer questions about what the work covers. We are available every day from 7:30 AM to 9:00 PM, including weekends. Call Winter Garden Electrical Company and get the job on the calendar.
Simple scheduling. Pricing agreed up front. Power back fast.
We take electrical work in these nearby communities as well: Union Park, Alafaya, Oviedo, Deltona, Oakland.
Here is a plain-language look at the electrical work we handle in University, Orange County and the surrounding area. Each row covers what the service includes, who it fits best, and one practical detail worth knowing before you call. If a job on your list is not here, call and we will tell you whether it falls in our scope.
| Type of Work | What's Included | Ideal For | Worth Knowing |
|---|---|---|---|
| Surge and Lightning Protection |
| Any home in Orange County where lightning exposure is a real seasonal risk | Florida records more lightning strikes per square mile than any other state. A panel-level surge protector intercepts voltage spikes before they reach the wiring and equipment downstream. |
| Electrical Panel and Service Upgrades |
| Older homes adding EV chargers, major appliances, or additional living space | A load calculation before the upgrade confirms the right panel size for what the home actually needs, not just what fits the budget. |
| Outlet and Switch Installation |
| Kitchens, bathrooms, outdoor areas, and any room getting new or updated receptacles | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor locations. We install and test each device before we leave. |
Call (689) 946-9829 to talk through the job, get a price, and get on the schedule. We are available seven days a week from 7:30 AM to 9:00 PM.
(689) 946-9829