Winter Garden Electrical Company handles electrical work for homeowners, landlords, property managers, and businesses across Winter Garden and Orange County. Whether you have a sparking outlet that needs attention or a panel upgrade you have been putting off for months, we take the call and get the work scheduled. Simple scheduling. Pricing agreed up front. Power back fast.
From a breaker that keeps tripping at two in the morning to a full service upgrade before a home sale, we cover the full range of residential and commercial electrical jobs. We offer prompt response, even for last-minute electrical calls, so you are not waiting around when something goes wrong.
Call (689) 946-9829 for a quote.
Most homeowners can't tell a minor wiring issue from a serious one, and that gap is where problems get expensive. A flickering light could be a loose connection at the fixture, or it could be a failing breaker feeding the whole circuit. A dead outlet might be a tripped GFCI reset away from working, or it might point to a deeper fault in the wiring behind the wall.
Common calls we handle include:
When we come out, the visit starts with a diagnostic. We test the circuit, trace the fault back to its source, and confirm the repair is holding before we leave. That process covers AFCI and GFCI protection as part of what gets checked, because a lot of intermittent faults trace back to protection devices that have reached the end of their useful life. We'll trace it, fix it, and test it before we leave.
Here's what most people get wrong about their wiring: the panel is the part that ages fastest and gets replaced last. An older fuse box, a panel that runs out of slots, or a 100-amp service feeding a house that now has a central air system and an EV charger are all setups waiting to cause problems.
We handle:
Dedicated appliance circuits are one of the most common reasons a panel gets upgraded. A dryer, a range, and a new EV charger each need their own circuit, and an older panel often cannot carry the added load without a service upgrade first. We size the work correctly from the start, and the wiring is done to the code inspectors here enforce. Let us handle the panel and the permits.
Good electrical work isn't complicated, it's just done right, and that applies whether the job is a single GFCI outlet in a bathroom or a full lighting retrofit across a commercial space. We install GFCI and AFCI outlets wherever code requires them, along with USB outlets, dimmer switches, and smart switches for homeowners who want more control over their lighting and load.
On the lighting side, we handle recessed and LED lighting retrofits, under-cabinet lighting for kitchens, outdoor and landscape lighting, and security and motion sensor lighting. LED retrofits in particular make a measurable difference on the electric bill in a Florida home that runs air conditioning year-round, because every watt the lighting doesn't draw is a watt the system doesn't have to compensate for.
Ceiling fan installation and wiring fits naturally into this work. A ceiling fan on a properly wired circuit and a switched outlet does real work in a Central Florida home, and we handle the wiring, the box support, and the switch leg when the existing setup is not built for it. We keep your home powered and safe.
Getting your power back is easier than you think. The same applies to adding capacity. A dedicated circuit is a straightforward job when the panel has room and the route to the appliance is clear, and we confirm panel capacity before any new circuit gets added.
We run dedicated circuits for:
For EV charger installation, the job involves running a dedicated 240-volt circuit from the panel to the garage or driveway, installing the Level 2 outlet or hardwired connection, and confirming the panel can carry the added load without affecting the rest of the house. If the panel needs an upgrade first, we scope both jobs together so nothing gets missed. One call and we are on it.
Central Florida's climate shapes the electrical work that comes up most often here. Hurricane season runs June through November, afternoon thunderstorms are a near-daily event in summer, and backyard pools are a standard feature on properties across Orange County. The three services below come up constantly in Winter Garden because of exactly those conditions.
A whole-home generator needs more than a fuel source to work. The electrical side of the job involves installing a transfer switch at the panel, running the wiring between the generator and the switch, and confirming the panel can handle the generator's output safely. When the power goes out during a storm, the transfer switch is what keeps the generator from backfeeding the utility line and what allows the system to pick up the load automatically. We handle the transfer switch, the dedicated circuit, and the panel connection so the generator is ready before the next storm arrives.
Florida leads the country in lightning strikes, and the surge that follows a nearby strike can reach every circuit in the house in a fraction of a second. Whole-home surge protection is installed at the panel level, where it intercepts voltage spikes before they reach appliances, electronics, and sensitive equipment. A single surge event can damage HVAC controls, refrigerators, televisions, and home office equipment at the same time. Panel-level surge protection covers all of it in one installation.
Pool pumps, spa heaters, underwater lighting, and automation equipment all need dedicated circuits and outdoor GFCI protection installed to code for wet locations. Central Florida's climate means pools and spas get used year-round, so the wiring takes real load over time. We run the dedicated circuits, install the GFCI protection, and wire outdoor equipment to the current code for wet and damp locations.
The homes and wiring in this area have their own quirks, and older construction in and around Winter Garden is no exception. Knob-and-tube wiring, aluminum branch circuit wiring from the 1960s and 70s, and undersized panels are all still present in the housing stock here. Each one carries a different set of risks, and each one has a different remediation path.
We handle full home rewiring, knob-and-tube replacement, and aluminum wiring remediation. For aluminum branch circuits, the work typically involves installing approved connectors or replacing the affected runs to eliminate the oxidation and loose-connection problems that aluminum wiring develops over time.
Electrical safety inspections cover the panel, the grounding and bonding system, the branch circuits, and the outlets throughout the home. Pre-purchase inspections are a common request from buyers who want to know what they are taking on before closing. If a prior inspection flagged a code violation, we can scope the repair and bring the wiring up to current standards. We keep you informed from diagnosis to final test, so there are no gaps between what we found and what we fixed. With a local company, a question about the work gets a straight answer.
Property managers and business owners have different electrical needs than a single-family home, and the stakes for downtime are higher. We handle commercial panel upgrades, commercial wiring for new builds and tenant improvements, commercial lighting installation, and dedicated circuits for commercial kitchen equipment, server rooms, and retail spaces.
Electrical inspections for commercial properties follow a different checklist than residential work, and we scope commercial jobs with that in mind. Whether the call is for a tripped breaker in a retail space or a full panel replacement before a new tenant moves in, we cover it.
Electrical pricing depends on the scope of the job, and the scope is something we work out on the call before anything is scheduled. A panel replacement, a rewiring project, an EV charger installation, and a ceiling fan swap each involve different materials, different labor, and sometimes different permit requirements. The price you get reflects the actual job, not a range wide enough to mean nothing.
Local coverage. Safe wiring. Costs explained before we start.
When you call, tell us what you are dealing with and where you are located. We confirm what the job involves, give you the rate, and answer questions about what the work covers. Electrical work done to the code inspectors here enforce is part of what you are getting, and that affects how the job is scoped and what materials go into it.
Call (689) 946-9829 and get the pricing conversation started before anything is scheduled.
We serve Winter Garden and the surrounding communities across Orange County. Nearby areas we cover include Windermere, Ocoee, Gotha, Oakland, Clermont, Apopka, and Dr. Phillips. If you are in the area and need electrical work scheduled, call and we will confirm coverage at your address.
We cover the full range of residential and commercial electrical work in Winter Garden and the surrounding Orange County area. That includes repairs and troubleshooting, breaker panel upgrades, outlet and switch installation, lighting, ceiling fans, EV charger circuits, backup generator hookups, whole-home surge protection, and pool and spa wiring.
If you are not sure whether your job fits, call (689) 946-9829 and we will work it out on the call.
Call (689) 946-9829 and describe what you are dealing with.
We ask the right questions on the call, scope the job based on what you tell us, and give you a price before anything is scheduled. You know what the work involves and what it costs before we book anything.
Stop using the outlet or circuit immediately and do not reset the breaker if it has tripped. A sparking outlet, a buzzing panel, or heat coming from a receptacle are signs of a fault that needs a proper diagnostic, not a DIY fix.
Call (689) 946-9829 during our hours, 7:30 AM to 9:00 PM every day, and we will work out what the schedule allows for an urgent call.
Flickering or dimming lights, breakers that trip repeatedly, outlets that are warm or discolored, a burning smell near a receptacle or the panel, and sparking when you plug something in are all signs that point to a fault that needs professional attention. These symptoms do not always mean a large repair is coming, but they do mean the wiring needs to be tested rather than watched. Call and we will talk through what you are seeing.
A partial outage, where some circuits work and others do not, often points to a problem at the panel rather than a single tripped breaker. One leg of the service entrance may have dropped, or a main breaker may be failing.
Check whether the breaker in question has tripped, but if resetting it does not restore power, call (689) 946-9829 so we can diagnose what is actually happening.
A breaker that trips repeatedly is telling you that the circuit is drawing more current than it is rated for, or that there is a fault somewhere on the wiring. Resetting it repeatedly without finding the cause puts the wiring and anything connected to it at risk. We trace the fault to its source and confirm whether the fix is a circuit repair, a load adjustment, or a panel issue.
Yes. We work with offices, retail spaces, restaurants, and multi-unit residential properties across Winter Garden and Orange County. Commercial panel upgrades, dedicated circuits for commercial equipment, lighting installation, and safety inspections are all in our scope.
Call (689) 946-9829 to discuss what your property needs.
We are available every day of the week, including Saturday and Sunday, from 7:30 AM to 9:00 PM. Weekend calls are handled the same way as weekday calls: scope on the phone, price confirmed before anything is scheduled.
The price is confirmed before the visit is scheduled, based on what you describe on the call. If the scope changes once we are on site, we confirm the updated cost before proceeding. You are not presented with a different number after the work is done.
It depends on the job. A single outlet repair or a ceiling fan swap can be done in under an hour. A panel upgrade or a rewiring project takes considerably longer, and we give you a realistic time estimate when we scope the job on the call. Larger jobs are confirmed in detail before anything is scheduled so you know what to expect.
Older wiring, aluminum branch circuits, a panel that needs to be upgraded before a new circuit can be added, and permit requirements can all affect the total cost. We ask about these factors on the call so the price we give you reflects the actual job at your property, not a generic estimate.
Winter Garden Electrical Company is available seven days a week from 7:30 AM to 9:00 PM.
Whether the job is a repair that needs attention soon or a panel upgrade you are planning ahead, call (689) 946-9829 for a quote and we will get it on the schedule.
(689) 946-9829 for a quote and we will get it on the schedule.
Here is a plain-language look at the electrical work we handle in Winter Garden and the surrounding area. Each row covers what the service includes, who it fits best, and one practical detail worth knowing before you call. If a job on your list is not here, call and we will tell you whether it falls in our scope.
| Type of Work | What's Included | Ideal For | Worth Knowing |
|---|---|---|---|
| Wiring and Circuit Installation |
| Older homes with outdated wiring materials or homes undergoing renovation | Aluminum wiring common in 1960s and 1970s construction can create connection problems at outlets over time. Remediation addresses the connection points where the risk is highest. |
| Electrical Repairs and Troubleshooting |
| Any home or business with an unexplained electrical symptom | We trace the fault and confirm the cause before any repair work begins, so you know exactly what is being fixed and why. |
| Surge and Lightning Protection |
| Any home in Orange County where lightning exposure is a real seasonal risk | Florida records more lightning strikes per square mile than any other state. A panel-level surge protector intercepts voltage spikes before they reach the wiring and equipment downstream. |
| Electrical Safety Inspections |
| Home buyers, landlords, and owners of older properties who want a clear picture of what they have | An inspection covers the panel, the branch circuits, the outlets, and the grounding so you know what is there before committing to repairs or a purchase. |
| Dedicated Appliance Circuits |
| Any major appliance or equipment that requires its own circuit | A Level 2 EV charger requires a dedicated 240-volt circuit. We size the wire and breaker for the charger's rated output, not just the minimum the code allows. |
| Electrical Panel and Service Upgrades |
| Older homes adding EV chargers, major appliances, or additional living space | A load calculation before the upgrade confirms the right panel size for what the home actually needs, not just what fits the budget. |
| Outlet and Switch Installation |
| Kitchens, bathrooms, outdoor areas, and any room getting new or updated receptacles | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor locations. We install and test each device before we leave. |
| Breaker and Fuse Repair |
| Homes with breakers that trip repeatedly or will not hold a reset | A breaker that keeps tripping is telling you something about the circuit or the load. We test both before recommending a replacement. |
| Ceiling Fan Installation |
| Rooms with no existing ceiling wiring or a fixture box not rated for fan weight | A standard light fixture box is not rated to support a ceiling fan. If the box needs to be replaced, that work is included in the installation scope. |
| Pool and Spa Wiring |
| New pool installations and upgrades to existing pool or spa equipment | Code requirements for wet-location wiring around pools are more specific than standard interior wiring. We confirm what applies at your installation before the work is scheduled. |
| Whole-Home Generator Installation |
| Homeowners who need power continuity during Florida's hurricane and storm season | The transfer switch is what prevents a generator from back-feeding the utility line during an outage. It has to be installed and connected correctly for the system to operate safely. |
| Lighting Installation |
| Interior remodels, covered lanais, and outdoor living spaces | Outdoor wiring in Florida's heat and humidity needs materials and terminations rated for the conditions. We specify the right components for wet and damp locations. |
Call (689) 946-9829 to talk through the job, get a price, and get on the schedule. We are available seven days a week from 7:30 AM to 9:00 PM.
(689) 946-9829