Winter Garden Electrical Company handles electrical work for homes and businesses across Winter Garden and the surrounding area. Whether the job is a quick repair, a full panel upgrade, or new circuits for a remodel, call and we can scope the work and get it scheduled. We are available seven days a week, from 7:30 AM to 9:00 PM, so you are not left waiting when something goes wrong.
Simple scheduling. Pricing agreed up front. Power back fast.
Call (689) 946-9829 to get a quote and get on the schedule.
Most homeowners can't tell a minor wiring issue from a serious one, and that is exactly why a diagnostic call matters. A flickering light might be a loose connection at the fixture. It might be a failing breaker. It might be something in the panel that needs attention before it becomes a bigger problem. We trace the fault, confirm what is causing it, and explain what the fix involves before any work begins.
We handle the full range of repair calls: dead outlets, tripping breakers, burning smells, sparking receptacles, buzzing panels, and partial outages where only part of the house has lost power. GFCI and AFCI protection issues are common calls too, especially in older homes where those devices were never installed or have worn out over time.
Property managers and landlords call us when a tenant reports something that needs a professional look. We scope the job on the call.
These are not situations to troubleshoot on your own. Each one points to a fault that needs proper diagnostics, and some of them carry real risk if left alone. We'll trace it, fix it, and test it before we leave.
A panel that was sized for a smaller home or a lighter electrical load is one of the most common reasons people call us. Older homes in the area often came with 100-amp service, and that capacity does not stretch far when you add an EV charger, a new HVAC unit's dedicated circuit, or a kitchen remodel with updated appliances.
We handle panel replacements, main panel upgrades from 100-amp to 200-amp service, and subpanel installation for additions, garages, or outbuildings. A service-entrance or meter upgrade may also be part of the picture if the utility connection itself needs to be brought up to current capacity. We run load calculations before recommending a panel size so the upgrade is right for what the home actually needs.
Commercial properties have the same issue. Offices, restaurants, and retail spaces that have grown or changed use often need a panel that can carry the current load safely. All of this work is done to the code inspectors here enforce, so it holds up at inspection without revision. Let us handle the panel and the permits.
Good electrical work isn't complicated, it's just done right, and that starts with matching the circuit to the load it has to carry. A dryer, a range, a hot tub, or a whole-home battery backup all need a dedicated circuit sized for that specific draw. Running the wrong wire gauge or sharing a circuit with other loads is how breakers trip and equipment gets damaged.
We install dedicated appliance circuits for major loads throughout the home, and we handle Level 2 EV charger circuits for homeowners who want a proper 240-volt outlet in the garage rather than a slow trickle from a standard receptacle.
For outlets, we install standard duplex outlets, GFCI outlets in kitchens, bathrooms, and outdoor locations, AFCI outlets where the code requires them, USB outlets for convenience, and weatherproof outdoor receptacles. Grounding and bonding are part of every installation. Dimmer switch installation and light switch replacement round out the smaller jobs that still need to be done correctly. We keep you informed from diagnosis to final test so you know what was done and why. One call and we are on it.
The homes and wiring in this area have their own quirks, and lighting is where that shows up most. Older construction may have no ceiling box where a fan needs to go. Covered lanais and screened outdoor spaces are common here, and they need wiring that handles the heat and humidity without corroding or failing early.
We install recessed lighting and LED can lights, under-cabinet lighting, pendant and chandelier fixtures, and standard light fixture replacements. For outdoor spaces, we handle landscape lighting wiring, security lights, motion sensor lights, porch lights, and flood lights. If you are finishing a lanai or adding lighting to a covered outdoor area, we run the circuit and install the fixtures to handle what Florida weather throws at it.
Ceiling fan installation is one of our most common calls. Whether the box needs to be replaced, the wiring needs to be run, or you are upgrading from a basic fixture to a fan with a light kit, we handle the full installation. Bathroom exhaust fan wiring is another job that comes up often in new construction and remodels. We keep your home powered and safe.
Florida's storm season runs from June through November, and the lightning frequency in this part of the state is among the highest anywhere in the country. Backyard pools are a standard feature of homes throughout Orange County, and the outdoor living spaces that come with them carry real electrical demands. Every job gets treated like it matters, because it does.
When a hurricane or a severe storm takes out the grid, a standby generator keeps the lights on, the refrigerator running, and the household functioning. We handle the electrical side of generator installation: wiring the unit, installing the transfer switch, and connecting everything to the panel so the switchover happens cleanly when utility power drops. The transfer switch is what keeps the generator from back-feeding the utility lines, and it has to be installed correctly. We scope that work on the call and confirm what the panel can support before anything is scheduled.
Florida records more lightning strikes per square mile than any other state, and a single nearby strike can send a voltage spike through the service entrance that damages appliances, electronics, and HVAC equipment throughout the house. A whole-home surge protector installed at the panel catches that spike before it reaches anything downstream. It is one of the most cost-effective electrical upgrades a homeowner here can make. We offer prompt response, even for last-minute electrical calls, so if a storm season is approaching and you want protection in place before it starts, call and we will get it scheduled.
Pools and hot tubs need dedicated circuits, weatherproof outlets, and proper grounding and bonding around all water-adjacent equipment. GFCI protection is required near water, and the wiring has to be run and terminated in a way that holds up to outdoor conditions. We install and wire pool equipment circuits, hot tub hookups, and outdoor receptacles for pump and filtration systems. The work follows the code requirements that apply to water-adjacent electrical installations, which are more specific than standard interior wiring.
Here's what most people get wrong about their wiring: age alone does not make it dangerous, but certain materials and methods that were standard decades ago are now known to carry risk. Aluminum wiring, which was common in homes built in the 1960s and 1970s, can create connection problems at outlets and fixtures over time. Knob-and-tube wiring, found in some older Florida homes, was never designed to carry modern electrical loads.
We handle whole-home rewiring, aluminum wiring remediation, and knob-and-tube replacement. We also conduct electrical safety inspections for homeowners who want to know what they have before they commit to repairs, buyers doing pre-purchase due diligence, and landlords who need to document the condition of a rental property. An inspection covers the panel, the wiring, the outlets, and the grounding to give you a clear picture of what is there and what needs attention.
Getting your power back is easier than you think. We work with offices, retail spaces, restaurants, and multi-unit residential properties throughout the area. Commercial panel upgrades, commercial lighting installation, and outlet installation for new or renovated spaces are all in our scope.
For landlords and property managers, we handle apartment electrical repairs, multi-unit troubleshooting, and the kind of inspection work that keeps a rental property in good shape between tenants. We work around occupied units where we can, and we communicate clearly about what the job involves before anything starts.
When you call for a quote, we discuss the job, ask the right questions, and give you a price before anything is scheduled. You are told what the work covers and what the rate is. If the scope changes once we are on site, we confirm the updated cost before proceeding.
There is no guessing about what the visit will cost. The pricing conversation happens on the phone, not after the work is done.
Simple scheduling. Pricing agreed up front. Power back fast.
We cover Winter Garden and the communities around it in Orange County, including Ocoee, Windermere, Gotha, Oakland, Apopka, and Clermont. If you are in the west Orange County area and need an electrician, call and we will confirm coverage at your address.
A whole-home surge protector installs at the main panel and intercepts voltage spikes before they reach the wiring and equipment downstream. Florida leads the country in lightning strikes, and a single nearby strike can damage appliances, electronics, and HVAC controls throughout the house in a fraction of a second. Panel-level protection works alongside point-of-use surge strips to cover both large transient events and the smaller daily spikes from motors cycling on and off. It is one of the more practical electrical upgrades for a home in this part of the state.
The electrical side of a generator installation includes installing a transfer switch at the panel, running the wiring between the generator and the switch, and confirming the panel can safely carry the generator's output. The transfer switch is what prevents the generator from back-feeding the utility line during an outage, and it has to be installed and wired correctly for the system to operate safely. We scope both the transfer switch and the panel connection on the call before anything is scheduled.
Pool and spa wiring requires dedicated circuits for the pump, heater, and lighting, along with GFCI protection at all water-adjacent outlets and proper grounding and bonding around the equipment. The code requirements for wet-location wiring are more specific than standard interior wiring, and they apply to both new pool installations and upgrades to existing equipment. We run the circuits, install the protection, and wire the outdoor equipment to the current code for wet and damp locations.
A burning smell near an outlet typically points to overheating at the connection, which can result from a loose wire, a failing device, or a circuit carrying more load than it was designed for. At the panel, a burning smell may indicate a failing breaker or overheating bus connections. Both situations need a diagnostic visit, not a wait-and-see approach.
Stop using the outlet or circuit and call (689) 946-9829.
A breaker trips when the circuit draws more current than the breaker is rated for, which can happen from a temporary overload or from a fault in the wiring or a connected device. If a breaker trips once and stays reset, it may have been a one-time overload. If it trips repeatedly, or if it trips without an obvious cause, the circuit needs to be tested to find out whether the problem is the load, the wiring, or the breaker itself. A breaker that will not hold is not a breaker to keep resetting.
Yes. A GFCI outlet provides shock protection even on an ungrounded circuit, and the National Electrical Code permits their use in that application as long as the outlet is labeled to indicate it is not grounded. We install GFCI outlets in the locations code requires and explain what the label means and why it is there. This is a common call in older Orange County homes where the original wiring did not include a ground conductor.
Clear access to the breaker panel, the outlets or fixtures involved in the work, and any attic hatch or crawlspace entry if the job involves running wire. For panel work, the area in front of the panel needs to be clear enough to work safely. Furniture, stored items, or appliances blocking access slow the job down and can affect the accuracy of the estimate you were given on the call.
When wiring runs through walls, attics, or crawlspaces that are difficult to access, or when the existing wiring is older aluminum or knob-and-tube, the labor involved in tracing, replacing, or connecting to it increases. We ask about the age and condition of the home's wiring on the call so the price reflects what the job actually involves. If we find something unexpected on site, we confirm the updated scope before proceeding.
A repair addresses a specific fault at a known location, a failed outlet, a bad breaker, a loose connection, and is typically done in a single visit. A rewire replaces the branch-circuit wiring throughout a home or a section of it, which involves opening walls or running new wire through existing cavities and is a multi-step project. The right path depends on what the wiring is, what condition it is in, and what the home needs to carry safely. We work that out on the call.
We are available every day from 7:30 AM to 9:00 PM, including weekends, and we take short-notice work when the schedule allows.
Call (689) 946-9829 and describe what you are dealing with.
We will tell you what is available and get the visit on the calendar as quickly as we can.
If the problem involves a sparking outlet, a burning smell, or a panel that is making noise or feels hot, stop using the affected circuit and do not reset the breaker. If you can safely turn off the breaker feeding the problem area, do so. Do not attempt to open the panel or remove outlet covers while waiting. Stay clear of the affected area and let us handle the diagnostic when we arrive.
If the ceiling has only a blank box or a light fixture box, a ceiling fan installation starts with a wiring job. We run a switch leg from the panel or an existing circuit, install a fan-rated ceiling box that can support the weight and motion of the fan, and wire the switch. The fan installation follows once the wiring is in place. This is a more involved job than replacing an existing fan, and the scope is confirmed on the call so the price reflects what the ceiling actually requires.
We are available seven days a week from 7:30 AM to 9:00 PM for residential and commercial electrical work throughout Winter Garden and the surrounding area. Whether it is a repair call, a panel upgrade, or a new installation, call and we will scope the job and give you a price on the phone.
Local coverage. Safe wiring. Costs explained before we start.
Call (689) 946-9829 to get started.
Here is a plain-language look at the electrical work we handle in Winter Garden and the surrounding area. Each row covers what the service includes, who it fits best, and one practical detail worth knowing before you call. If a job on your list is not here, call and we will tell you whether it falls in our scope.
| Type of Work | What's Included | Ideal For | Worth Knowing |
|---|---|---|---|
| Wiring and Circuit Installation |
| Older homes with outdated wiring materials or homes undergoing renovation | Aluminum wiring common in 1960s and 1970s construction can create connection problems at outlets over time. Remediation addresses the connection points where the risk is highest. |
| Electrical Repairs and Troubleshooting |
| Any home or business with an unexplained electrical symptom | We trace the fault and confirm the cause before any repair work begins, so you know exactly what is being fixed and why. |
| Surge and Lightning Protection |
| Any home in Orange County where lightning exposure is a real seasonal risk | Florida records more lightning strikes per square mile than any other state. A panel-level surge protector intercepts voltage spikes before they reach the wiring and equipment downstream. |
| Electrical Safety Inspections |
| Home buyers, landlords, and owners of older properties who want a clear picture of what they have | An inspection covers the panel, the branch circuits, the outlets, and the grounding so you know what is there before committing to repairs or a purchase. |
| Dedicated Appliance Circuits |
| Any major appliance or equipment that requires its own circuit | A Level 2 EV charger requires a dedicated 240-volt circuit. We size the wire and breaker for the charger's rated output, not just the minimum the code allows. |
| Electrical Panel and Service Upgrades |
| Older homes adding EV chargers, major appliances, or additional living space | A load calculation before the upgrade confirms the right panel size for what the home actually needs, not just what fits the budget. |
| Outlet and Switch Installation |
| Kitchens, bathrooms, outdoor areas, and any room getting new or updated receptacles | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor locations. We install and test each device before we leave. |
| Breaker and Fuse Repair |
| Homes with breakers that trip repeatedly or will not hold a reset | A breaker that keeps tripping is telling you something about the circuit or the load. We test both before recommending a replacement. |
| Ceiling Fan Installation |
| Rooms with no existing ceiling wiring or a fixture box not rated for fan weight | A standard light fixture box is not rated to support a ceiling fan. If the box needs to be replaced, that work is included in the installation scope. |
| Pool and Spa Wiring |
| New pool installations and upgrades to existing pool or spa equipment | Code requirements for wet-location wiring around pools are more specific than standard interior wiring. We confirm what applies at your installation before the work is scheduled. |
| Whole-Home Generator Installation |
| Homeowners who need power continuity during Florida's hurricane and storm season | The transfer switch is what prevents a generator from back-feeding the utility line during an outage. It has to be installed and connected correctly for the system to operate safely. |
| Lighting Installation |
| Interior remodels, covered lanais, and outdoor living spaces | Outdoor wiring in Florida's heat and humidity needs materials and terminations rated for the conditions. We specify the right components for wet and damp locations. |
How do I know if my home needs a panel or service upgrade?
The most common signs are breakers that trip under normal loads, lights that dim when a large appliance kicks on, a panel that feels warm or makes a humming sound, or a home that simply cannot support the electrical load you are trying to run. Older homes with 100-amp service often hit this wall when an EV charger, a new HVAC unit's dedicated circuit, or a kitchen remodel is added. A load calculation tells us whether the panel is the limiting factor or whether the issue is somewhere in the branch wiring.
Do I need to be home when the electrician arrives?
For most jobs, yes. Access to the panel, the affected outlets or fixtures, and any attic or crawlspace entry is needed to scope and complete the work. If the job is limited to an exterior circuit or a detached structure, we can discuss what access is actually required when you call. We confirm the details on the phone before anything is scheduled.
What does it mean when lights flicker or dim in one part of the house?
Flickering in a single fixture usually points to a loose connection at that fixture or a failing bulb. Dimming across a whole room or a section of the house when a large appliance starts up often points to a circuit or panel capacity issue. If the flickering is random and affects multiple circuits, that can indicate a problem at the panel or at the service entrance. Each symptom points somewhere different, which is why we diagnose before we replace anything.
Faults Traced Before Anything Is Replaced
We confirm the cause of the problem before recommending a repair. That means you are not paying to replace parts that are not the issue.
What is the risk of a warm or buzzing outlet?
A warm outlet typically means the connection inside is loose or the device is carrying more load than it was designed for. Buzzing usually points to a loose wire or a failing receptacle. Both are signs that the outlet needs to be looked at, not just reset or ignored. Overheating at a connection point is one of the more common causes of electrical fires in residential wiring, and it does not always show other symptoms before it becomes a problem.
What does EV charger installation actually involve?
A Level 2 home charger requires a dedicated 240-volt circuit run from the panel to the garage or parking area where the charger will be mounted. That means a new circuit, the right wire gauge for the charger's rated output, a weatherproof outlet or a hardwired connection depending on the charger model, and a breaker sized to match. We also check panel capacity before the circuit is run, since some older panels need to be upgraded before they can carry the additional load.
How are estimates and pricing handled?
When you call, we discuss the job, ask the questions needed to scope it accurately, and give you a price before anything is scheduled. You know what the work covers and what the rate is before we arrive. If the scope changes once we are on site, we confirm the updated cost before proceeding. The pricing conversation happens on the phone, not after the work is done.
Permits and Inspection Handled Where Required
Panel upgrades, new circuits, and most installation work require a permit in Orange County. We handle the paperwork and coordinate the inspection as part of the job.
When should I call an electrician instead of attempting a fix myself?
Any work that involves the breaker panel, new circuit runs, outlet replacement in kitchens or bathrooms, or anything that requires opening a wall or accessing the service entrance should go to an electrician. Replacing a light bulb or resetting a tripped breaker is reasonable to handle on your own. Anything beyond that, especially if the symptom involves heat, a burning smell, sparking, or repeated tripping, needs a proper diagnostic. The risk is not just the immediate fix. It is what you might not see behind the wall.
How long does a panel upgrade typically take?
A straightforward panel replacement from 100-amp to 200-amp service usually takes most of a working day. The utility may need to disconnect and reconnect power at the meter, which adds coordination time. If the service entrance also needs to be upgraded or if the existing wiring needs remediation as part of the job, the scope expands and we discuss that timeline on the call. We scope the full job before it is scheduled so you know what the day looks like.
Older and Newer Wiring Both Handled
From aluminum wiring remediation in mid-century homes to new circuit runs in recent construction, we work with what is there and scope the job honestly before anything starts.
Is the electrical work permitted and inspected?
Panel upgrades, new circuit runs, and most installation work require a permit and a code inspection in Orange County. We handle the permit side and schedule the inspection as part of the job. Work done to the code inspectors here enforce holds up at inspection without revision, which matters when you sell the home or when an insurance claim involves the electrical system.
What are the concerns with aluminum wiring in older homes?
Aluminum wiring was used in many homes built in the 1960s and 1970s as a lower-cost alternative to copper. Over time, aluminum connections at outlets, switches, and fixtures can loosen due to the metal expanding and contracting with heat cycles. That loosening creates resistance at the connection, which generates heat. Remediation typically involves installing approved connectors at each device location rather than replacing all the wiring throughout the house, though the right approach depends on the condition and configuration of what is there.
Is a home ready for additional electrical load before adding appliances or a workshop?
That depends on what the panel is rated for and what it is already carrying. A load calculation looks at the existing circuits, their ratings, and the new load you want to add. If the panel has room, a new dedicated circuit is straightforward. If it does not, a panel upgrade or a subpanel for the garage or workshop is the path forward. We work that out on the call so the recommendation fits what the home actually needs.
Call (689) 946-9829 to talk through the job, get a price, and get on the schedule. We are available seven days a week from 7:30 AM to 9:00 PM.
(689) 946-9829